Showing 1 - 10 of 19, total 2 pages [First] [Previous] [ Next] [ Last] |
| |
1 | | | photoelectric sensor
Specification: Photoelectric Sensor
Detail: &©|8226;Built-in and high performance sensors &©|8226;Output mode: NPN DC NO/NC PNP DC NO/NC &©|8226;The sensing distance is between 10cm and 20m
|
|
2 | | | 7. chf series general purpose frequency inverter
Specification: CHF
Detail: The DSP control system is applied to the CHF series frequency converted to complete optimal V/F control, so it has more superior performances than the conventional C/F control. The CHF series frequency converters are general ...
|
|
3 | | | 6. ea(e) series electric actuator
Specification: EA(E)SERIES
Detail: EA (E) series of motor driven executors are the drive devices for loop type electronic valves, capable of performing on/off and angle position control by using exterior power switching or external output signals. The shell of...
|
|
4 | | | 5. tsr series three-phase solid relay
Specification: TSR
Detail: Characteristics of products &©|8226;Sealed installation and better structure &©|8226;LED indicators energy guiding state &©|8226;Secure, reliable and strong capacity of interference resistance &©|8226;They can be used for lon...
|
|
5 | | | 3. sd series single-phase solid relay
Specification: D2525 D2540 D4825 D4840
Detail: The SD series SSR is a kind of non contact through and disconnected electronic switches, and its ends are control ends to connect the pulse voltage signals input by instruments, and the other two ends are controlled ends to co...
|
|
6 | | | 2. e series simple scr power controller
Specification: E SERIES
Detail: The E series simple type of electric power regulators are a set of brand new controllers developed by this co***ny after the P series to reduce costs of controllers, to make the volume smaller and to improve visual appearance....
|
|
7 | | | 1. p series multifunction scr power controller
Specification: P SERIES
Detail: SCR power regulators are widely used in different power regulation equipment in the industry, such as kilns, thermal treatment furnaces, electric heating furnaces, electroplating equipment, launching machines, extruders, high ...
|
|
8 | | | 2. e4t series multifunctional transfer
Specification: E4T
Detail: DIN track installation or panel installation &©|8226;Complete input signal varieties: thermocouple, thermal resistance, DC4-20mA current &©|8226;Capable of collecting various analog signals on industrial occasions to be conver...
|
|
9 | | | 1. digital pid sensor display meter
Specification: DIGITAL
Detail: It is especially applicable to some of the occasions only requiring display and transmission of measurement values. It can support various kinds of thermocouples, thermal resistance and linear signal input, with ultra measurem...
|
|
10 | | | cm series electricity monitor
Specification: CM6 CM7 CM9
Detail: 1. RST button can be used for resetting within the unit 2. Built-in 0-5A CT and current proximity range can be freely ***ermined by the CT ratio. 3. It provides at most three levels of relay alarms, 10 alarm modes election a...
|
|
Home
